Questions Frequently Asked

An engineered clear coat designed to restore color and seal the surface.

FadeAway can be used on metal, plastic, fiberglass and rubber. Use it to restore color and seal the surface.

On our website or in several retail locations.

We currently only sell aerosol cans, but we will be rolling out bulk quantities such as gallons soon.

FadeAway can be cleaned off surfaces it was not intended for using a claybar or a rag with paint thinner. The sooner it is removed the better.

• 1.Pressure wash and steam clean desired surfaces
• 2.DO NOT use wax or degreasers
• 3.Use wax remover if surface has been waxed
• 4.Wet sand Automotive, marine, RV and any other clear coated finishes before applying. Use 600 grit sandpaper

The lifetime of FadeAway depends on the surface it’s applied on, as well as the conditions it is exposed to. FadeAway lasts longer than waxes, dressing, or other applications typically used for this.

You can wax over it, but we do not recommend it. FadeAway seals and protects which eliminates the need for wax.

FadeAway was derived from a need to create something that was cost effective, as well as universal for restoring color.

Yes, like most aerosols and paints FadeAway is harmful, and we recommend wearing a mask while using the product.

We do not recommend using FadeAway on glass, surfaces with clearcoat still in tact, and any other surface not described on the can.

• 1.Use even strokes
• 2.Keep a wet edge
• 3.Make sure to cover thoroughly